H O M E

 

Products

Have questions? General inquiries? 

Phone: 626.337.6888     Email: info@modular-systems.net

Home             Shelving             Display & Signage             Suspension             Contact            Download             About          T & C

A B O U T

D O W N L O A D

C O N T A C T

G A L L E R Y

Modular Display Systems

Instructions & catalog

General/Sales

Installations

modular Facebook square blue large standoff_coffee_bean_americana Google + square red large

C A B L E S

Cable display systems are used to create a stable, discrete yet very strong ceiling to floor cable system. Cable display systems are designed to create stylish interior displays by incorporating a modular display approach. Use the ceiling to floor cable display system to create shelving, or posters and advertisments, signage, banners, brochure holders, decorations where a wall is not available. Where there is a wall, mount the desired display using the wall to wall cable system. This cable display system can be utilized by trade show exhibit manufacturers to enhance the appearance of their end products. Our twist on accessory can be used with any size channels.

 

The cable display system's flexibility allows for a versatile and modular approach to the traditional bulky display approach. The cable system can be used as a panel support, to install different partitions and create a sophisticated office environment without resorting to the traditional drywall, paint and door approach. It can be used as a system to hang any architectural display.

 

Each cable system has a safe working load of 100 LBS. The safe working load for each cable display system refers to the load capacity of the system as a whole, including the substrate (surface) the system is installed on. Always confirm that the surface/substrate is strong enough to hold the combined weight of the desired system and the contents. Manufactured from international standardized aluminum and protected with a layer of satin anodization, this durable system is made to last. Utilizing a self tightening technology, once installed, the cables will not slack. Cables are manufactured and tested thoroughly to U.L. and TUV standards.

Cable Suspension with Panel Clamp

Cable Display System Ceiling to Floor

Cable Display System Wall to Wall

Cable Suspension with Hook

Cable Suspension with Channel Holder

Vertical Clamp - single 1/4" (6mm)

Vertical Clamp - double 1/4" (6mm)

Horizontal clamp - double 1/4" (6mm)

Horizontal clamp - single 1/4" (6mm)

Horizontal shelf suspender

  • Ceiling to floor cable kit

  • Top and bottom fittings

  • Single sets

  • Ø1.6mm 4M galvanized steel cable

  • Working load of up to 100 LBS

  • #8 screw or M6 stud

 

Anodized satin

Aluminum

 

ACCF164

 

  • Wall to wall cable kit

  • Top to bottom fittings

 

  • Ø1.6mm 3M galvanized steel cable

  • Working load of up to 100 LBS

  • #8 screw or M6 stud

 

 

ACWW163

 

  • Ceiling hung suspension hook

  • Ceiling fittings and hook

  • Tool less adjustable

  • Single sets

  • Ø1.6mm 2M galvanized steel cable

  • Working load of up to 100 LBS

  • #8 screw or M6 stud

 

Nickel plated chrome

 

 

CSH2

 

  • Ceiling hung suspension channel holder

  • Ceiling fittings and holder

  • Profile not included

  • Single sets

  • Ø1.6mm 2M galvanized steel cable

  • Working load of up to 100 LBS

  • #8 screw or M6 stud

 

Nickel plated chrome

 

 

CSCH2

 

  • Ceiling hung suspension panel clamp

  • Ceiling fittings and clamp

  • Panel not included

  • Single sets

  • Ø1.6mm 2M galvanized steel cable

  • Working load of up to 100 LBS

  • #8 screw or M6 stud

  • Clamp holds up to 3mm

 

Nickel plated chrome

 

 

CSPC2

 

  • Single side

  • Vertical clamp

 

  • Ø20mm

  • For panels up to 1/4" (6mm) thickness

 

 

AC-VPC

 

  • Use to support panels from bottom

 

  • Requires Ø10mm hole

 

 

AC-HSS

 

  • Double side

  • Vertical clamp

 

  • Ø20mm

  • For panels up to 1/4" (6mm) thickness

 

 

AC-DVPC

 

 

  • Ø20mm

  • For panels up to 1/4" (6mm) thickness

 

 

AC-HSC

 

 

  • Ø20mm

  • For panels up to 1/4" (6mm) thickness

 

 

AC-DHSC

 

Quick_Ship_red

Description

Specifications

Finish

Item No.

Description

Specifications

Finish

Item No.

Description

Specifications

Finish

Item No.

Description

Specifications

Finish

Item No.

Description

Specifications

Finish

Item No.

Description

Specifications

Finish

Item No.

Description

Specifications

Finish

Item No.

Description

Specifications

Finish

Item No.

Description

Specifications

Finish

Item No.

Description

Specifications

Finish

Item No.

The ceiling suspension is a very attractive cable system. It utilizes a hook glider. The glider allows the user to adjust the height at anytime without any tools. This is very useful especially in situations where one project consists of multiple install heights. The ceiling suspension with channel holder can be used to attach to channel profiles. The glider will allow quick access to adjustments without any tools. The height can be adjusted at anytime by pressing down on the insert. Any access cable can be cut to length. The ceiling suspension with channel holder can be used to attach to channel profiles. The glider will allow quick access to adjustments without any tools. The height can be adjusted at anytime by pressing down on the insert. Any access cable can be cut to length. The hook with the cable suspension system utilizes a hook glider aka gripper. The glider allows the user to adjust the height at anytime without any tools. This is very useful especially in situations where one project consists of multiple install heights. The channel holder acts as the connecting point between the cable and extrusion profile. The channel holder aka gripper can be adjusted up and top at will, without the use of tools. This allows for easy installation and adjustments to accomodate for various ceiling and presentation heights. Simply press down on the insert to move the gripper up and down. The ceiling suspension with panel holder is great for suspending panels. The glider allows for easy height adjustments without any tools. Use this to suspend signs, decoration, wayfinding, and much more. The single vertical clamp for cable display system can accomodate any substrate up to a thickness of 7mm. The set screw comes with a nylon tip to protect the substrate during installation. The satin finish looks great and goes well with any other color. Backside of the single vertical clamp for the cable display system. The double vertical clamp for cable display system can accomodate any substrate up to a thickness of 7mm. The clamp is double sided, therefore can be used to support substrates on both sides of the cable. This item is used ideally in the middle of any system with more than 3 cables. The set screw comes with a nylon tip to protect the substrate during installation. The satin finish looks great and goes well with any other color. Backside of the double vertical clamp for the cable display system. The single horizontal clamp for the cable display system accomodates thickness up to 7mm. This clamp can be used to hold glass, acrylic, resin, wood, metal or any other material. The nylon tip on the set screw prevents damage to the substrate during installation. Backside of the single horizontal clamp for the cable display system. The double horizontal clamp for cable display system can accomodate up to a thickness of 7mm. The clamp is double sided. This clamp is used ideally in the middle cables of a system that is 3 cables or more. Be sure to space the clamps out evenly. There should be a clamp for every corner/side of the substrate. Backside of the double horizontal clamp for the cable display system. The horizontal shelf suspender is used to create shelving by supporting the substrate from below. The substrate requires a 3/8" hole to install the suspender. Using the suspender will require the installer to put together the shelves prior to the final securing of the bottom fittings. Back side of the horizontal shelf suspender for the cable display system. Aluminum channel. Can be used with cable display system. Easy installation and great functionality. Use self tapping screws on indent. Anchor to be used as a replacement to existing fittings/anchors that come with systems. clip to be used with existing anchors. Can be used on any system.

Channel

Channel supports installation of cable system. Flush finish. No mounting marks. Easy to install and cable fittings can be easily slid left and right.

 

 

Anodized satin Aluminum

 

CRS2

 

Description

Specifications

Finish

Item No.

Channel T anchor

Anchor replacement to use with channel. Secures system to channel.

 

Designed to work with CRS2 and most tracks.

 

Zinc plated

Brass

 

BCA-22125

 

Description

Specifications

Finish

Item No.

Channel clip

Clip to use with existing fittings/anchor.

 

  • 1/2" (12mm) long stud

  • 3/4" (18mm) long stud

 

Stainless steel

 

CRS105

CRS106

 

 

Description

Specifications

Finish

Item No.

  • Width: 13/16" (20mm)

  • Height: 25/64" (10mm)

  • Length: 79" (2m)

Cable display system can be used in various application. From creating shelves to displaying window signage. This component is part of the entire cable display system for ceiling to floor. Cable display system can be used in various application. From creating shelves to displaying window signage. This component is part of the entire cable display system for ceiling to floor. Aluminum channel. Can be used to create flush finish. Aluminum channel. Can be used to create flush finish. Aluminum channel. Can be used to create flush finish. aluminum_shelving_cable_display_system_b aluminum_shelving_cable_display_system_a

Vertical Clamp - single 5/32" (4mm)

  • Single side

  • Vertical clamp

 

  • For panels up to 5/32" (4mm) thickness

 

 

AC-VPC4

 

Description

Specifications

Finish

Item No.

Vertical Clamp - double 5/32" (4mm)

  • Double side

  • Vertical clamp

 

  • For panels up to 5/32" (4mm) thickness

 

 

AC-DVPC4

 

Description

Specifications

Finish

Item No.

Vertical Clamp - single 3/8" (10mm)

Vertical Clamp - double 3/8" (10mm)

 

  • For panels up to 3/8" (10mm) thickness

 

 

 

 

 

  • For panels up to 3/8" (10mm) thickness

 

 

 

 

Description

Specifications

Finish

Item No.

Description

Specifications

Finish

Item No.

Horizontal Clamp - single 3/8" (10mm)

Horizontal Clamp - double 3/8" (10mm)

 

  • For panels up to 3/8" (10mm) thickness

 

 

 

 

 

  • For panels up to 3/8" (10mm) thickness

 

 

 

Description

Specifications

Finish

Item No.

Description

Specifications

Finish

Item No.

  • Single side

  • Horizontal clamp

  • Double side

  • Horizontal clamp

  • Single side

  • Vertical clamp

  • Double side

  • Vertical clamp

  • Single side

  • Horizontal clamp

  • Double side

  • Horizontal clamp

Anodized satin Aluminum

Anodized satin Aluminum

AC-VPC10

AC-DVPC10

AC-HSC10

AC-DHSC10

Anodized satin

Aluminum

Anodized satin

Aluminum

Anodized satin Aluminum

Anodized satin Aluminum

Anodized satin Aluminum

Anodized satin Aluminum

Anodized satin Aluminum

Anodized satin Aluminum

Anodized satin Aluminum

Anodized satin Aluminum

The single vertical clamp for cable display system can accomodate any substrate up to a thickness of 7mm. The set screw comes with a nylon tip to protect the substrate during installation. The satin finish looks great and goes well with any other color. Backside of the single vertical clamp for the cable display system. The double vertical clamp for cable display system can accomodate any substrate up to a thickness of 7mm. The clamp is double sided, therefore can be used to support substrates on both sides of the cable. This item is used ideally in the middle of any system with more than 3 cables. The set screw comes with a nylon tip to protect the substrate during installation. The satin finish looks great and goes well with any other color. Backside of the double vertical clamp for the cable display system. The single vertical clamp for cable display system can accomodate any substrate up to a thickness of 7mm. The set screw comes with a nylon tip to protect the substrate during installation. The satin finish looks great and goes well with any other color. Backside of the single vertical clamp for the cable display system. The double vertical clamp for cable display system can accomodate any substrate up to a thickness of 7mm. The clamp is double sided, therefore can be used to support substrates on both sides of the cable. This item is used ideally in the middle of any system with more than 3 cables. The set screw comes with a nylon tip to protect the substrate during installation. The satin finish looks great and goes well with any other color. Backside of the double vertical clamp for the cable display system. The single horizontal clamp for the cable display system accomodates thickness up to 7mm. This clamp can be used to hold glass, acrylic, resin, wood, metal or any other material. The nylon tip on the set screw prevents damage to the substrate during installation. Backside of the single horizontal clamp for the cable display system. The double horizontal clamp for cable display system can accomodate up to a thickness of 7mm. The clamp is double sided. This clamp is used ideally in the middle cables of a system that is 3 cables or more. Be sure to space the clamps out evenly. There should be a clamp for every corner/side of the substrate. Backside of the double horizontal clamp for the cable display system. aluminum_cable_display_systems_wall_to_wall